Ücretsiz

CN 7222

Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.e.s.

✓ CBAM kapsamında Iron and steel

CBAM maliyet önizlemesi

Güncel ETS fiyatı: €76.15/t CO₂. Örnek: 1 ton CN 7222 varsayılan faktörlerle bugün ~€16.41 CBAM sertifika maliyeti.

Doğrudan emisyonlar
1.88 t CO₂/t
Dolaylı emisyonlar
0.275 t CO₂/t
CBAM cost (1000 t shipment)
€16,410
Bu nasıl hesaplanır?

CBAM sertifika maliyeti = gömülü emisyon × ETS fiyatı × (1 − ücretsiz tahsis faktörü) × kademeli geçiş çarpanı.

Phase-in 2026: 10% of full certificate cost. Free allocation assumed 0% in this preview.

CBAM maliyetimi hesapla →

AB'ye en büyük ihracatçılar

Eurostat Comext, son mevcut yıl. Gösterilen rakamlar AB dışı ithalat (ton).

KökenTon / yılPay
China92,000100%

Source: Eurostat Comext annual extra-EU trade.

Bu kod için uyumluluk rehberi

AutoCBAM ekibi tarafından gözden geçirildi — son güncelleme 2026-04-28.

Methodology guide -- CN 7222 (stainless bars and rods, other)

CN 7222 covers cold-finished and profile stainless bars, used in machining and automotive applications. Most production is downstream of CN 7221 hot-rolled stainless bar.

Step 1 -- request the full chain verification. Like wire (CN 7217), CN 7222 requires upstream stainless-bar emissions to be passed through. A finishing-only emissions report is insufficient.

Step 2 -- handle alloy specifics carefully. Stainless bar applications often demand specific grades (303, 316, etc.) with controlled alloy content. Ask the supplier for grade-specific emissions if your imports are grade-concentrated.

Step 3 -- track quarterly, like all in-scope steel. From 2026, importers hold 50% of projected CBAM certificates by end of each quarter. Stainless bar volumes are smaller but per-tonne CBAM cost is higher than carbon steel, so the dollar impact is non-negligible.

Sıkça sorulan sorular

What is CN 7222?
Other bars and rods of stainless steel (bright bars, polygonal sections, profile bars). Used in machining, automotive components, fasteners.
How does CN 7222 differ from CN 7221 (hot-rolled stainless bar)?
CN 7221 is hot-rolled, in coils, with circular cross-section. CN 7222 is everything else -- cold-finished, profile bars, polygonal. Emissions per tonne are similar; the cold-finishing step adds <0.1 t/t.

Bu ürün için emisyon-maliyet raporu alın

CN 7222 için sektör varsayılanları, ilk 3 köken ülke ve ETS bağlantılı maliyet öngörüsü içeren ücretsiz PDF.

İlgili kodlar

Üst başlık: 7222

  • CN 722211 — Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of
  • CN 722219 — Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl.
  • CN 722220 — Other bars and rods of stainless steel, not further worked than cold-formed or cold-finish
  • CN 722230 — Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, o
  • CN 722240 — Angles, shapes and sections of stainless steel, n.e.s.

Iron and steel sektöründeki tüm kodlar →

Başka bir CN kodu kontrol et →

Yalnızca referans veri — kesin CBAM kapsamı TARIC beyanı ve CBAM Ek I güncellemelerine bağlıdır.