Free tool

CN 722211

Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section

✓ In scope of CBAM Iron and steel

CBAM cost preview

Live ETS price: €76.15/t CO₂. Sample: 1 tonne of CN 722211 at default factors costs ~€78.24 in CBAM certificates today.

Direct emissions
10 t CO₂/t
Indirect emissions
0.275 t CO₂/t
CBAM cost (1000 t shipment)
€78,244
How is this calculated?

CBAM certificate cost = embedded emissions × ETS price × (1 − free-allocation factor) × phase-in markup.

Phase-in 2026: 10% of full certificate cost. Free allocation assumed 0% in this preview.

Calculate my CBAM cost →

Default embedded emissions

When you cannot collect verified supplier data, the EU lets you use these default values for the Iron and steel sector.

OriginDirect emissionsIndirect emissionsTotal
Taiwan10—10
Indonesia8.69—8.69
India6.48—6.48
China5.59—5.59
Türkiye5.31—5.31

t CO₂e per tonne of product. Source: EU Implementing Reg. 2025/2621 Annex IV.

How to comply for this code

Methodology guide -- iron and steel

For iron and steel CN codes, the embedded emissions are dominated by the production route (BF-BOF integrated mill vs. EAF mini-mill). The 1.88 t CO2/t default value is conservative for EAF imports and aggressive for BF-BOF imports.

Step 1: classify the production route. Ask the supplier whether the product is from a blast-furnace + basic oxygen furnace (BF-BOF) line or from an electric-arc furnace (EAF). EAF emissions are typically 70-80% lower than BF-BOF.

Step 2: collect verified data. Request a CBAM communication template from each supplier. The EU Implementing Regulation 2025/2621 specifies the data points: scope 1 + scope 2 emissions per tonne of finished product, allocation method, and verifier accreditation ID.

Step 3: apply Article 9 deductions. If the producer's country has an explicit carbon price (e.g. UK ETS, EU ETS by way of installations covered, or national carbon tax), document the per-tonne carbon cost paid -- this deducts directly from your CBAM certificate obligation.

Step 4: monitor quarterly. Under Reg. 2025/2083 importers must hold 50% of projected certificates by end of each quarter from 2026. Run the calculator quarterly to track exposure.

Frequently asked questions

Are products of iron and steel always in scope of CBAM?
Most CN headings 7201-7229 and 7301-7326 are in scope. A handful of finished articles (e.g. domestic cookware) are out. Check the specific 8-digit code, not the chapter heading.
What is the default direct emissions factor for steel?
EU sector default: 1.88 t CO2 per tonne of finished steel for direct emissions, plus 0.275 t CO2 indirect (electricity). Real BF-BOF mills are typically 2.0-2.4 t/t direct; EAF mills are around 0.4-0.6 t/t.
Do I have to use the EU default values?
No. Defaults are a fallback when verified supplier data is unavailable. From 2026 onward you should request actual emissions data from the producer using the EU CBAM communication template -- this is usually cheaper than using defaults, especially for low-carbon producers.
How is the cost adjusted year-on-year?
Phase-in markups apply: 10% of full certificate cost in 2026, 20% in 2027, 30% in 2028, scaling to 100% by 2034. The full calculator at /calculator applies the correct markup for your chosen year.
What about carbon prices already paid in the origin country?
Article 9 of the CBAM Regulation (EU) 2023/956 lets you deduct verifiable carbon prices paid in the country of origin. AutoCBAM Pro automates this; the free preview ignores it.

Get an emissions cost report for this product

Free PDF with sector defaults, top-3 origin countries and an ETS-linked cost forecast for CN 722211.

Related codes

Parent heading: 7222

  • CN 7222 — Other bars and rods of stainless steel; angles, shapes and sections of stainless steel, n.
  • CN 722219 — Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl.
  • CN 722220 — Other bars and rods of stainless steel, not further worked than cold-formed or cold-finish
  • CN 722230 — Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, o
  • CN 722240 — Angles, shapes and sections of stainless steel, n.e.s.

All codes in Iron and steel →

Search any CN code →

Reference data only — confirmed CBAM scope ultimately depends on TARIC declaration and the latest amendments to CBAM Annex I.