免费工具

CN 7219

Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced"

✓ 受 CBAM 管控 Iron and steel

CBAM 成本预览

当前 ETS 价格：€83.4/t CO₂。示例：按默认因子计算，1 吨 CN 7219 今日约需 €17.97 的 CBAM 证书。

直接排放
1.88 t CO₂/t
间接排放
0.275 t CO₂/t
CBAM cost (1000 t shipment)
€17,973
如何计算？

CBAM 证书成本 = 嵌入排放 × ETS 价格 × (1 − 免费配额系数) × 过渡期调整。

Phase-in 2026: 10% of full certificate cost. Free allocation assumed 0% in this preview.

计算我的 CBAM 成本 →

对欧盟主要出口国

Eurostat Comext 最新可用年份。展示的是欧盟外进口量（吨）。

来源国吨 / 年占比
China290,00034%
Taiwan220,00026%
South Korea180,00021%
India160,00019%

Source: Eurostat Comext annual extra-EU trade.

该编码的合规要点

经 AutoCBAM 团队人工审核 — 最近更新 2026-04-28。

Methodology guide -- CN 7219 (stainless steel flat-rolled, ≥600mm wide)

Stainless flat is a high-value CBAM steel category dominated by China, Taiwan, South Korea and India. Per-tonne CBAM cost is higher than carbon steel due to the alloy content's embedded emissions.

Step 1 -- understand the production route. Stainless is EAF-dominated globally -- but the EAF here is a stainless-specific furnace fed with carbon steel + ferrochrome + ferronickel. Total direct emissions are 1.5-2.5 t CO2/t, slightly above the EU iron-steel default.

Step 2 -- watch for upstream alloy emissions. The chromium and nickel inputs carry embedded emissions of their own (ferrochrome ~3-4 t CO2/t Cr; ferronickel ~10-15 t CO2/t Ni). These are not separately declared under CBAM but are reflected in the supplier's scope 1 + 2 numbers when alloy production is on-site.

Step 3 -- request verified data; defaults under-state. The EU 1.88 t/t default is calibrated to carbon steel and is too low for stainless. Verified supplier data is more accurate -- and the verifier report should disclose the alloy mix and the upstream alloy emissions separately.

Step 4 -- handle Taiwan and South Korea favourably. Taiwanese stainless mills (Yieh United Steel, Walsin Lihwa) are EAF route; emissions sit at 1.5-1.8 t/t direct. Korean POSCO stainless is similar. Both jurisdictions have or are developing carbon pricing, opening Article 9 deductions over time.

常见问题

How is stainless steel emissions intensity different from carbon steel?
Higher per tonne but with different production routes. Stainless is dominated by EAF (with chromium, nickel additions) -- typical direct emissions are 1.5-2.5 t CO2/t. The chromium / nickel inputs themselves carry significant embedded emissions.
Are nickel and chromium inputs in CBAM scope?
No. The CBAM Annex I covers iron / steel products including stainless. Upstream nickel and chromium production is not in scope. The emissions factor for stainless is published in the EU defaults.
Does the AISI grade matter for CBAM?
Marginally. Higher-alloy stainless (e.g. 316 vs. 304) has slightly higher embedded emissions due to higher nickel content -- but the EU default is grade-agnostic.
Who are the largest exporters of CN 7219?
China (~290kt/yr), Taiwan, South Korea and India. China's share has grown as Russian / Belarusian flows are zeroed.

获取该产品的排放-成本报告

免费 PDF，含 CN 7219 行业默认值、前 3 大来源国与 ETS 关联成本预测。

相关编码

上一级品目: 7219

  • CN 72191100 — Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than
  • CN 721912 — Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than h
  • CN 721913 — Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than
  • CN 721914 — Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than
  • CN 721921 — Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than
  • CN 721922 — Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than
  • CN 72192300 — Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than
  • CN 72192400 — Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than
  • CN 72193100 — Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than
  • CN 721932 — Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than

Iron and steel 行业所有编码 →

检查任何 CN 编码 →

仅供参考 — 实际 CBAM 范围以 TARIC 申报和 CBAM 附件 I 最新修订为准。