Gratuit

CN 7214

Bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils)

✓ Couvert par le MACF Iron and steel

Aperçu du coût CBAM

Prix ETS actuel : 83.4 €/t CO₂. Exemple : 1 tonne de NC 7214 aux facteurs par défaut coûte ~17.97 € en certificats CBAM aujourd'hui.

Émissions directes
1.88 t CO₂/t
Émissions indirectes
0.275 t CO₂/t
CBAM cost (1000 t shipment)
€17,973
Comment est-ce calculé ?

Coût certificat CBAM = émissions intégrées × prix ETS × (1 − facteur de quotas gratuits) × majoration de phase.

Phase-in 2026: 10% of full certificate cost. Free allocation assumed 0% in this preview.

Calculer mon coût CBAM →

Principaux exportateurs vers l'UE

Eurostat Comext, dernière année disponible. Les volumes affichés sont les importations extra-UE (tonnes).

OrigineTonnes / anPart
Türkiye510,00056%
Ukraine220,00024%
China180,00020%

Source: Eurostat Comext annual extra-EU trade.

Comment se conformer pour ce code

Revu par l'équipe AutoCBAM — mis à jour 2026-04-28.

Methodology guide -- CN 7214 (other bars and rods, hot-rolled, of iron or non-alloy steel)

Rebar (CN 7214) is the workhorse of EU construction imports. Türkiye dominates the trade (~500kt/yr), with Ukraine and Egypt as secondary suppliers. The market is almost entirely EAF route, which makes the CBAM emissions story unusually favourable.

Step 1 -- assume EAF unless told otherwise. Turkish mills are 95%+ EAF. Default sector emissions (1.88 t/t direct) overstate true emissions by roughly 4×. Pushing for verified data is the highest-leverage action you can take.

Step 2 -- collect verified data using the EU template. A typical Turkish EAF mill reports 0.40-0.55 t CO2/t direct + 0.30-0.40 t CO2/t indirect. The indirect number is sensitive to the Turkish grid mix (currently ~0.45 kg CO2/kWh). Suppliers using their own captive renewables can drop indirect to <0.1 t/t -- worth asking.

Step 3 -- track scrap percentage for transparency. Modern Turkish EAF mills run 95-100% steel scrap. Some operators claim "near-zero" emissions based on scrap-only input; verify by examining the verifier report and the Yearbook of Iron and Steel Statistics for the supplier.

Step 4 -- monitor Türkiye's ETS rollout. Türkiye is preparing a national ETS with steel coverage. Once in force (likely 2026-2027), you'll get an Article 9 deduction. Document supplier carbon-price payments quarterly to capture the deduction at year-end.

Step 5 -- model the multi-year cost path. A 10,000-tonne rebar program at €4.25/tonne CBAM in 2026 = €42.5k. Same program at €42/tonne in 2034 = €420k. Lock in low-carbon supply now or budget for the increase.

Step 6 -- handle EU-internal rebar mills as a baseline. EU rebar mills (Riva, Celsa) are EAF-route and covered by EU ETS. Their effective carbon cost is comparable to Turkish supply once CBAM equalises in 2034. The cost case for non-EU sourcing degrades over time.

Questions fréquentes

Is CN 7214 (rebar) always EAF-route?
In Europe and Türkiye, almost always yes. EAF is the cost-competitive choice for rebar globally. Some Indian and Chinese rebar is BF-BOF, but volumes into the EU are smaller.
What is the CBAM cost of a typical rebar shipment?
At 0.5 t/t verified emissions × €85/t ETS × 10% phase-in × 1 (no free allocation in this preview) ≈ €4.25/tonne in 2026. By 2034, approximately €42/tonne.
Are rebar grades (B500B vs B500C) treated differently?
No. Grade affects mechanical properties, not CBAM emissions. Same EAF process, same emissions factor.
Do welded rebar mesh and prefabricated assemblies fall under 7214?
No. Welded mesh moves to CN 7314; prefabricated assemblies often classify under CN 7308 (structures). Each has its own CBAM treatment -- check the 8-digit code.

Recevoir un rapport coût-émissions

PDF gratuit avec les valeurs par défaut, les 3 principaux pays d'origine et une prévision de coût liée à l'ETS pour NC 7214.

Codes liés

Position parente: 7214

  • CN 72141000 — Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregu
  • CN 72142000 — Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deform
  • CN 72143000 — Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-dr
  • CN 721491 — Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn o
  • CN 721499 — Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-ext

Tous les codes du secteur Iron and steel →

Vérifier n'importe quel code NC →

Données de référence uniquement — la portée CBAM dépend de la déclaration TARIC et des dernières modifications de l'Annexe I.