Are zinc and paint coatings counted in the CBAM mass?

No -- only the steel mass. Subtract the coating weight (typically 1-3% for galvanised, 0.05-0.1% for paint) from the customs-declared mass before applying the emissions factor.

Does CN 7210 include hot-dip galvanised, electrogalvanised AND painted coil?

Yes -- CN 7210 is all coated flat-rolled product ≥600mm wide. The 8-digit sub-codes refine by coating type (Sn, Cr, Zn, Al, paint, etc.). Emissions per tonne of steel are similar across coatings.

Is Korean galvanised steel cheaper on CBAM than Chinese?

On verified-data terms, yes -- Korean integrated mills (POSCO, Hyundai) report 1.9-2.1 t/t direct vs. Chinese mill averages of 2.2-2.5 t/t. K-ETS coverage also gives Korean importers an Article 9 deduction unavailable for Chinese-origin product (China's national ETS is not yet considered explicit carbon pricing for CBAM purposes -- check current EU implementing acts).

Do I owe CBAM on the coating itself?

No. Zinc, aluminium, tin and paint coatings are not in CBAM scope. The coating mass is excluded from the CBAM mass calculation.

Language

Ücretsiz

CN 7210

Name: CN 7210 -- Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolle
Brand: AutoCBAM
SKU: 7210

Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated

✓ CBAM kapsamında Iron and steel

CBAM maliyet önizlemesi

Güncel ETS fiyatı: €78.45/t CO₂. Örnek: 1 ton CN 7210 varsayılan faktörlerle bugün ~€27.3 CBAM sertifika maliyeti.

Doğrudan emisyonlar: 3.205 t CO₂/t
Dolaylı emisyonlar: 0.275 t CO₂/t
CBAM cost (1000 t shipment): €27,301

Bu nasıl hesaplanır?

CBAM sertifika maliyeti = gömülü emisyon × ETS fiyatı × (1 − ücretsiz tahsis faktörü) × kademeli geçiş çarpanı.

Phase-in 2026: 10% of full certificate cost. Free allocation assumed 0% in this preview.

CBAM maliyetimi hesapla →

Varsayılan gömülü emisyonlar

Doğrulanmış tedarikçi verisine ulaşamadığınızda AB, Iron and steel sektörü için bu varsayılan değerleri kullanmanıza izin verir.

Köken	Doğrudan emisyonlar	Dolaylı emisyonlar	Total
China	3.205	—	3.205
Türkiye	2.51	—	2.51
South Korea	2.144	—	2.144
Japan	2.13	—	2.13
Indonesia	8.25	—	8.25

ton ürün başına ton CO₂e. Source: EU Implementing Reg. 2025/2621 Annex IV.

AB'ye en büyük ihracatçılar

Eurostat Comext, son mevcut yıl. Gösterilen rakamlar AB dışı ithalat (ton).

Köken	Ton / yıl	Pay
South Korea	770,000	35%
China	590,000	27%
Türkiye	470,000	21%
Japan	380,000	17%

Source: Eurostat Comext annual extra-EU trade.

Bu kod için uyumluluk rehberi

AutoCBAM ekibi tarafından gözden geçirildi — son güncelleme 2026-04-28.

Methodology guide -- CN 7210 (flat-rolled steel, coated)

CN 7210 covers galvanised, painted, tin-plated and aluminium-coated flat steel -- the workhorse of the appliance, automotive and construction supply chains. South Korea is the dominant exporter into the EU; China and Türkiye follow.

Step 1 -- subtract the coating mass before applying the emissions factor. A typical hot-dip galvanised coil has 100-275 g/m² zinc on each side -- about 1.5-3% of total mass on a 1mm-thick coil. The customs declaration includes coating weight; CBAM does not. Build a per-product coating-mass spreadsheet and apply it to every shipment.

Step 2 -- emissions are dominated by the upstream steel. Coating itself is a low-emission step (~0.05 t CO2/t). The dominant 1.9-2.4 t CO2/t direct emissions come from the upstream BF-BOF or EAF mill. If you import HDG from a non-integrated coater that takes its CRC from a third party, the coater's emissions are tiny -- but the CBAM declaration must capture the upstream emissions of the cold-rolled coil they bought.

Step 3 -- understand allocation for non-integrated coaters. Many suppliers (especially in Türkiye) buy CRC and coat locally. Reg. 2025/2621 Article 7 requires the importer to obtain a chained emissions report covering the full upstream value chain. A coater-only emissions report is invalid for CBAM.

Step 4 -- apply Article 9 deductions for K-ETS. Korean integrated coaters fall under K-ETS coverage. The K-ETS price (~KRW 8,000-12,000/t CO2 in 2026) deducts from your CBAM bill if documented properly.

Step 5 -- watch the year-end declaration deadline. All CBAM costs for calendar-year imports are settled by 31 May of the following year. Imports of CN 7210 in Q4 2026 must be reconciled by 31 May 2027.

Sıkça sorulan sorular

Are zinc and paint coatings counted in the CBAM mass?: No -- only the steel mass. Subtract the coating weight (typically 1-3% for galvanised, 0.05-0.1% for paint) from the customs-declared mass before applying the emissions factor.
Does CN 7210 include hot-dip galvanised, electrogalvanised AND painted coil?: Yes -- CN 7210 is all coated flat-rolled product ≥600mm wide. The 8-digit sub-codes refine by coating type (Sn, Cr, Zn, Al, paint, etc.). Emissions per tonne of steel are similar across coatings.
Is Korean galvanised steel cheaper on CBAM than Chinese?: On verified-data terms, yes -- Korean integrated mills (POSCO, Hyundai) report 1.9-2.1 t/t direct vs. Chinese mill averages of 2.2-2.5 t/t. K-ETS coverage also gives Korean importers an Article 9 deduction unavailable for Chinese-origin product (China's national ETS is not yet considered explicit carbon pricing for CBAM purposes -- check current EU implementing acts).
Do I owe CBAM on the coating itself?: No. Zinc, aluminium, tin and paint coatings are not in CBAM scope. The coating mass is excluded from the CBAM mass calculation.

Bu ürün için emisyon-maliyet raporu alın

CN 7210 için sektör varsayılanları, ilk 3 köken ülke ve ETS bağlantılı maliyet öngörüsü içeren ücretsiz PDF.

Yalnızca referans veri — kesin CBAM kapsamı TARIC beyanı ve CBAM Ek I güncellemelerine bağlıdır.