Kostenlos

CN 7225

Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced"

✓ Vom CBAM erfasst Iron and steel

CBAM-Kostenvorschau

Aktueller ETS-Preis: €76.15/t CO₂. Beispiel: 1 Tonne KN 7225 kostet bei Standardfaktoren heute ~€16.41 an CBAM-Zertifikaten.

Direkte Emissionen
1.88 t CO₂/t
Indirekte Emissionen
0.275 t CO₂/t
CBAM cost (1000 t shipment)
€16,410
Wie wird das berechnet?

CBAM-Zertifikatskosten = eingebettete Emissionen × ETS-Preis × (1 − Freizuteilungsfaktor) × Einführungs-Markup.

Phase-in 2026: 10% of full certificate cost. Free allocation assumed 0% in this preview.

CBAM-Kosten berechnen →

Wichtigste Exporteure in die EU

Eurostat Comext, letztes verfügbares Jahr. Angegeben sind die Extra-EU-Importmengen (Tonnen).

HerkunftTonnen / JahrAnteil
China320,000100%

Source: Eurostat Comext annual extra-EU trade.

So setzen Sie diesen Code konform um

Vom AutoCBAM-Team geprüft — zuletzt aktualisiert 2026-04-28.

Methodology guide -- CN 7225 (flat-rolled alloy steel, ≥600mm)

CN 7225 is the alloy-steel cousin of CN 7208 -- adds silicon, manganese, chromium, vanadium for specific industrial applications. Chinese mills are the dominant non-EU source.

Step 1 -- verify alloy content and route. Alloy steel is BF-BOF dominated; emissions are 1.9-2.2 t/t direct. Silicon-electrical steel for transformers is a high-value sub-category with growing verification practice -- ask first.

Step 2 -- handle automotive HSLA carefully. Automotive supply chains are increasingly demanding low-carbon steel for ESG reporting. Some mills (POSCO, Tata Steel UK) offer "green steel" verified-data programs at a premium. Worth investigating for high-volume automotive imports.

Step 3 -- understand grade-specific allocation. A mill running multiple alloy grades on the same line must allocate emissions per Reg. 2025/2621 Article 7. The complexity favours suppliers with grade-segregated production over multi-grade plants.

Häufige Fragen

What is CN 7225?
Flat-rolled products of other alloy steel, ≥600mm wide. Includes silicon-electrical steel, tool steel, high-strength low-alloy (HSLA) steel for automotive.
How does the alloy content affect emissions?
Slightly higher than carbon steel due to alloying elements (silicon, manganese, chromium, vanadium). Typical 1.9-2.2 t CO2/t direct from BF-BOF mills.
Is silicon-electrical steel (transformer steel) covered?
Yes -- CN 72251910 covers grain-oriented silicon-electrical steel; in scope of CBAM. Strategic for the energy transition (transformers, motors), so verified data is increasingly available.

Emissions- und Kostenbericht erhalten

Kostenloses PDF mit Sektorstandardwerten, Top-3 Herkunftsländern und ETS-gekoppelter Kostenprognose für KN 7225.

Verwandte Codes

Übergeordnete Position: 7225

  • CN 72251100 — Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-oriented
  • CN 72251910 — Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolled
  • CN 72251990 — Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "co
  • CN 722530 — Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not fur
  • CN 722540 — Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not fur
  • CN 722550 — Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not fur
  • CN 72259100 — Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rol
  • CN 72259200 — Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rol
  • CN 72259900 — Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rol

Alle Codes im Sektor Iron and steel →

Beliebigen KN-Code prüfen →

Nur Referenzdaten — der endgültige CBAM-Anwendungsbereich richtet sich nach der TARIC-Anmeldung und der aktuellen Fassung von CBAM Anhang I.