Kostenlos

CN 720211

Ferro-manganese, containing by weight > 2% of carbon

✓ Vom CBAM erfasst Iron and steel

CBAM-Kostenvorschau

Aktueller ETS-Preis: €76.15/t CO₂. Beispiel: 1 Tonne KN 720211 kostet bei Standardfaktoren heute ~€14.96 an CBAM-Zertifikaten.

Direkte Emissionen
1.69 t CO₂/t
Indirekte Emissionen
0.275 t CO₂/t
CBAM cost (1000 t shipment)
€14,963
Wie wird das berechnet?

CBAM-Zertifikatskosten = eingebettete Emissionen × ETS-Preis × (1 − Freizuteilungsfaktor) × Einführungs-Markup.

Phase-in 2026: 10% of full certificate cost. Free allocation assumed 0% in this preview.

CBAM-Kosten berechnen →

Standard-Emissionswerte

Wenn keine verifizierten Lieferantendaten vorliegen, dürfen Importeure für den Sektor Iron and steel diese Standardwerte verwenden.

HerkunftDirekte EmissionenIndirekte EmissionenTotal
Angola1.69—1.69
Australia1.69—1.69
Brazil1.69—1.69
Canada1.69—1.69
Chile1.69—1.69

t CO₂e pro Tonne Produkt. Source: EU Implementing Reg. 2025/2621 Annex IV.

So setzen Sie diesen Code konform um

Methodology guide -- iron and steel

For iron and steel CN codes, the embedded emissions are dominated by the production route (BF-BOF integrated mill vs. EAF mini-mill). The 1.88 t CO2/t default value is conservative for EAF imports and aggressive for BF-BOF imports.

Step 1: classify the production route. Ask the supplier whether the product is from a blast-furnace + basic oxygen furnace (BF-BOF) line or from an electric-arc furnace (EAF). EAF emissions are typically 70-80% lower than BF-BOF.

Step 2: collect verified data. Request a CBAM communication template from each supplier. The EU Implementing Regulation 2025/2621 specifies the data points: scope 1 + scope 2 emissions per tonne of finished product, allocation method, and verifier accreditation ID.

Step 3: apply Article 9 deductions. If the producer's country has an explicit carbon price (e.g. UK ETS, EU ETS by way of installations covered, or national carbon tax), document the per-tonne carbon cost paid -- this deducts directly from your CBAM certificate obligation.

Step 4: monitor quarterly. Under Reg. 2025/2083 importers must hold 50% of projected certificates by end of each quarter from 2026. Run the calculator quarterly to track exposure.

Häufige Fragen

Are products of iron and steel always in scope of CBAM?
Most CN headings 7201-7229 and 7301-7326 are in scope. A handful of finished articles (e.g. domestic cookware) are out. Check the specific 8-digit code, not the chapter heading.
What is the default direct emissions factor for steel?
EU sector default: 1.88 t CO2 per tonne of finished steel for direct emissions, plus 0.275 t CO2 indirect (electricity). Real BF-BOF mills are typically 2.0-2.4 t/t direct; EAF mills are around 0.4-0.6 t/t.
Do I have to use the EU default values?
No. Defaults are a fallback when verified supplier data is unavailable. From 2026 onward you should request actual emissions data from the producer using the EU CBAM communication template -- this is usually cheaper than using defaults, especially for low-carbon producers.
How is the cost adjusted year-on-year?
Phase-in markups apply: 10% of full certificate cost in 2026, 20% in 2027, 30% in 2028, scaling to 100% by 2034. The full calculator at /calculator applies the correct markup for your chosen year.
What about carbon prices already paid in the origin country?
Article 9 of the CBAM Regulation (EU) 2023/956 lets you deduct verifiable carbon prices paid in the country of origin. AutoCBAM Pro automates this; the free preview ignores it.

Emissions- und Kostenbericht erhalten

Kostenloses PDF mit Sektorstandardwerten, Top-3 Herkunftsländern und ETS-gekoppelter Kostenprognose für KN 720211.

Verwandte Codes

Übergeordnete Position: 7202

  • CN 720219 — Ferro-manganese, containing by weight <= 2% carbon
  • CN 720241 — Ferro-chromium, containing by weight > 4% of carbon
  • CN 720249 — Ferro-chromium, containing by weight <= 4% of carbon
  • CN 72026000 — Ferro-nickel

Alle Codes im Sektor Iron and steel →

Beliebigen KN-Code prüfen →

Nur Referenzdaten — der endgültige CBAM-Anwendungsbereich richtet sich nach der TARIC-Anmeldung und der aktuellen Fassung von CBAM Anhang I.